features nec's 1w single control l, s-band spdt switch UPG2015TB california eastern laboratories applications ? l, s-band digital cellular or cordless handsets ? pcs, w-lan, wll and bluetooth tm ? short range wireless nec's UPG2015TB is a single control gaas mmic l, s-band spdt (single pole do uble throw) switch for mobile phone and l, s- band applications. this device can oper ate frequency from 0.5 to 2.5 ghz, with low insert ion loss and high isolation. this device is housed in a 6-pin su per minimold package, suitable fo r high-density surface mounting. description ? supply voltage: v dd = 2.7 to 3.0 v (2.8 v typ.) ? single switch control voltage: v cont (h) = 2.7 to 3.0 v (2.8 v typ.) v cont (l) = ? 0.2 to +0.2 v (0 v typ.) ? low insertion loss: l ins1 = 0.25 db typ. @ f = 0.5 to 1.0 ghz, v dd = 2.8 v, v cont = 2.8 v/0 v l ins2 = 0.30 db typ. @ f = 1.0 to 2.0 ghz,v dd = 2.8 v, v cont = 2.8 v/0 v l ins3 = 0.35 db typ. @ f = 2.5 ghz,v dd = 2.8 v, v cont = 2.8 v/0 v ? high isolation: isl1 = 27 db typ. @ f = 0.5 to 2.0 ghz, v dd = 2.8 v, v cont = 2.8 v/0 v isl2 = 24 db typ. @ f =2.5 ghz, v dd = 2.8 v, v cont = 2.8 v/0 v ? power handling: p in (0.1 db) = +27.0 dbm typ. @ f = 2.5 ghz, v dd = 2.8 v, v cont = 2.8 v/0 v ? high-density surface mounting: 6-pin super minimold package (2.0 1.25 0.9 mm) part number package marking supplying form UPG2015TB-e3 6-pin super minimold g3j ? embossed tape 8 mm wide ? pin 1, 2, 3 face the perforation side of the tape ? qty 3 kpcs/reel ordering information remark to order evaluation samples, contact your nearby sales of ce. part number for sample order: UPG2015TB caution observe precautions when handling because these devices are sensitive to electrostatic discharge.
UPG2015TB absolute maximum ratings (t a = 25c, unless otherwise speci ed) recommended operating range (t a = 25c, unless otherwise speci ed) pin no. pin name 1 output1 2 gnd 3 output2 4v cont 5 input 6v dd truth table vcont input ? output1 input ? output2 low off on high on off pin connections and internal block diagram parameter symbol ratings unit supply voltage v dd +6.0 v switch control voltage v cont +6.0 v input power p in +33 dbm operating ambient temperature t a ? 45 to +85 c storage temperature t stg ? 55 to +150 c parameter symbol min. typ. max. unit supply voltage v dd 2.7 2.8 3.0 v switch control voltage (h) v cont (h) 2.7 2.8 3.0 v switch control voltage (l) v cont (l) ? 0.2 0 0.2 v (top view) 3 2 1 4 5 6 g3j (bottom view) 4 5 6 3 2 1 (top view) 3 2 1 4 5 6
electrical characteristics (t a = +25 c, v dd = 2.8 v, v cont = 2.8 v/0 v, dc blocking capacitors = 56 pf, unless otherwise speci ed) standard characteristics for reference (t a = +25 c, v dd = 2.8 v, v cont = 2.8 v/0 v, dc blocking capacitors = 56 pf, unless otherwise speci ed) parameter symbol test conditions min. typ. max. unit 1 db gain compression input power note p in (1 db) f = 2.0 ghz ? +30.0 ? dbm note p in (1 db) is the measured input power level when the insertion loss increases 1 db more than that of linear range. parameter symbol test conditions min. typ. max. unit insertion loss 1 l ins1 f = 0.5 to 1.0 ghz ? 0.25 0.45 db insertion loss 2 l ins2 f = 1.0 to 2.0 ghz ? 0.30 0.50 db insertion loss 3 l ins3 f = 2.5 ghz ? 0.35 0.55 db isolation 1 isl 1 f = 0.5 to 2.0 ghz 23 27 ? db isolation 2 isl 2 f = 2.5 ghz 20 24 ? db input return loss rl in f = 0.5 to 2.5 ghz 15 20 ? db output return loss rl out f = 0.5 to 2.5 ghz 15 20 ? db 0.1 db gain compression input power note p in (0.1 db) f = 2.0 ghz +25.5 +27.0 ? dbm f = 2.5 ghz +25.5 +27.0 ? dbm supply current i dd ? 50 100 a switch control current i cont ? 420 a switch control speed t sw ? 0.3 2.0 s note p in (0.1 db) is the measured input power level when the insertion loss increases 0.1 db more than that of linear range. caution it is necessary to use dc blocking capacitors with the device. the value of dc blocking capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching speed and the condition with actual board of your system. the range of recommended dc blocking capacitor value is less than 100 pf. UPG2015TB
4-277 UPG2015TB evaluation circuit (v dd = 2.8 v, v cont = 2.8 v/0 v, dc blocking capacitors = 56 pf) the application circuits and their parameters are for reference only and are not intended for use in actual design-ins. output1 output2 56 pf 56 pf 4 5 6 3 2 1 v dd v cont input 56 pf 1 000 pf 1 000 pf
UPG2015TB illustration of the test circuit assembled on evaluation board using the nec evaluation board symbol values c1, c2, c3 56 pf c4, c5 1 000 pf 6pin smm spdt sw vc1 vc2 in out 1 out 2 c1 c1 c3 c5 c1 c2 c4 c1 c2 c2 v dd output1 input output2 v cont g3j
UPG2015TB remark the graphs indicate nominal characteristics. typical characteristics (t a = 25oc, v dd = 2.8 v, v cont = 2.8 v/0 v, dc blocking capacitors = 56 pf, unless otherwise speci ed) 0.5 0 ?1.0 ?0.5 ?2.0 ?1.5 ?2.5 ?3.0 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 i nsers i on l oss l ins (db) frequency f (ghz) input?output1 insersion loss vs. frequency 20 10 ?10 0 ?30 ?20 ?40 ?50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 i so l at i on isl (db) frequency f (ghz) input?output1 isolation vs. frequency 20 10 ?10 0 ?30 ?20 ?40 ?50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 i nput r eturn l oss rl in (db) frequency f (ghz) input?output1 input return loss vs. frequency 20 10 ?10 0 ?30 ?20 ?40 ?50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 isolation isl (db) frequency f (ghz) input?output2 isolation vs. frequency 20 10 ?10 0 ?30 ?20 ?40 ?50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 input return loss rl in (db) frequency f (ghz) input?output2 input return loss vs. frequency 0.5 0 ?1.0 ?0.5 ?2.0 ?1.5 ?2.5 ?3.0 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 insersion loss l ins (db) frequency f (ghz) input?output2 insersion loss vs. frequency
UPG2015TB remark the graphs indicate nominal characteristics. 30 32 20 22 24 26 28 8 10 12 14 16 18 10 12 14 16 18 20 22 24 26 28 30 32 34 o utput p ower p out (db m ) in p ut power p in ( dbm ) output power vs. input power f = 1.0 ghz 28 30 8 10 12 14 16 18 20 22 24 26 10 12 14 16 18 20 22 24 26 28 30 32 output power p out (dbm) in p ut power p in ( dbm ) output power vs. input power f = 2.5 ghz 20 10 ?10 0 ?30 ?20 ?40 ?50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 o utput r eturn l oss rl out (db) frequency f (ghz) input?output1 output return loss vs. frequency 20 10 ?10 0 ?30 ?20 ?40 ?50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 output return loss rl out (db) frequency f (ghz) input?output2 output return loss vs. frequency
UPG2015TB p ackage dimensions 6-pin super minimold (unit: mm) 0.90.1 0.7 0 to 0.1 0.15 +0.1 -0.05 0.2 +0.1 -0.05 2.00.2 1.3 0.65 0.65 1.250.1 2.10.1 0.1 min.
UPG2015TB recommended soldering conditions this product should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recommended below, contact your nearby sales of ce. soldering method soldering conditions condition symbol infrared re ow peak temperature (package surface temperature) : 260 c or below t ime at peak temperature : 10 seconds or less t ime at temperature of 220 c or higher : 60 seconds or less preheating time at 120 to 180 c : 120 30 seconds maximum number of re ow processes : 3 times maximum chlorine content of rosin ux (% mass) : 0.2%(wt.) or below ir260 vps peak temperature (package surface temperature) : 215 c or below t ime at temperature of 200 c or higher : 25 to 40 seconds preheating time at 120 to 150 c : 30 to 60 seconds maximum number of re ow processes : 3 times maximum chlorine content of rosin ux (% mass) : 0.2%(wt.) or below vp215 w ave soldering peak temperature (molten solder temperature) : 260 c or below t ime at peak temperature : 10 seconds or less preheating temperature (package surface temperature) : 120 c or below maximum number of ow processes : 1 time maximum chlorine content of rosin ux (% mass) : 0.2%(wt.) or below ws260 partial heating peak temperature (pin temperature) : 350 c or below soldering time (per side of device) : 3 seconds or less maximum chlorine content of rosin ux (% mass) : 0.2%(wt.) or below hs350 caution do not use different soldering methods together (except for partial heating). life support applications these nec products are not intended for use in life support devices, appliances, or systems where the malfunction of these prod ucts can reasonably be expected to result in personal injury. the customers of cel using or selling these products for use in such applications do so at their own risk and agree to fully indemnify cel for all damages resulting from such improper use or sale. a business partner of nec com p ound semiconductor devices, ltd . 02/18/200 4
|
